Please repeat these steps for each cabinet. Use the diagram above as your guide.

1. Identify the room the cabinet will be in.
2. Enter all radiator dimensions and options, if possible.
3. Choose a style and finish.
4. Press the "Add" button at the bottom of the screen to add this cabinet to your estimate request list.

"H" Height of radiator.
"L" Length of radiator including all pipes.
"D" Depth of radiator (measure depth from the surface that the cabinet will rest against; i.e. the wall, trim or sill).
"1" Height to underside of trim (if radiator is below trim).
"2" Height to underside of windowsill ledge.
"3" Sill length.
"4 & 5" Determine if the radiator is centered on the window. To do so, measure the length of the sill and divide the length by 2. Measure from the center point to the left and right ends of the radiator.

In the above example the sill length is 42", the center point is 21". The center point to the right end of the radiator is 23" and the center point to the left end of the radiator is 25". Therefore, the radiator is 2" off center (25"-23"=2"). Adding 2" to the length of the radiator (L) will enable you to center the cabinet under the window.

Please Note:

When you are ready to place your order, if you live in an area we travel to, your cabinets will be delivered fully assembled by our cabinetmaker. Cabinets delivered elsewhere will be shipped via UPS. These cabinets will require some basic assembly.

For large volume purchases we can ship by common carrier and special arrangements will be made and confirmed with you.

Please speak with your sales representative for more information on shipping rates and assembly.

Please repeat these steps for each bookcase:

1. Choose bookcase type (Freestanding or WILL sit on top of a radiator cabinet).
2. Choose a style and finish.
3. Press the "Add" button on the bottom of the screen to add this bookcase to your estimate request list.

In many cases, baseboard heaters sit in front of the baseboard molding. On order to clear the trim, only the top of our cover extends to the wall beyond the depth of the end panels by 1-1/4". If your baseboard and quarter round exceed a depth of 1-1/4" you may choose to remove a potion or the quarter round if you wish to have the top touch the wall.

To measure your cover: measure the height (H), length (L) and depth (D) of your heater. Include any pipes when measuring the length.

Instructions: Repeat these steps for each cover:

1. Identify the cover room
2. Enter the heater dimensions
3. Choose the finish
4. Will this cover meet another one in a corner Yes/No?
5. After entering a LEFT one, the next one is automatically a right one with the same values for room, finish and height.
6. Press the "Add" button at the bottom of the screen to add this cover to your estimate request list.